Pro-face GP-2500 Manual do Utilizador Página 1

User ManualGP-2400/2500/2600 Series(Pro-Designer Compatible)

PrefaceGP-2400/2500/2600 Series User Manual 9 About the GP’s Display Panel• The GP’s currently displayed data, its voltage*1 and brightness set-tin

PrefaceGP-2400/2500/2600 Series User Manual10The GP2400/2500/2600 Series refers to the following GP model numbers:GP2400/2500/2600 Series Models*1 Un

PrefaceGP-2400/2500/2600 Series User Manual 11The GP’s packing box contains the items listed below. Please check to confirmthat all items shown belo

PrefaceGP-2400/2500/2600 Series User Manual12UL/c-UL (CSA) Application NotesGP2500-TC11*1 and GP2600-TC11*1 are UL/c-UL(CSA) approved units. (UL Fi

PrefaceGP-2400/2500/2600 Series User Manual 13fail to meet UL/c-UL standard requirements.• Be sure to set the switch to turn the GP power OFF at the

PrefaceGP-2400/2500/2600 Series User Manual14The list below describes the documentation conventions used in this manual.Documentation ConventionsSymb

GP-2400/2500/2600 Series User Manual 1-1Chapter1 Introduction1. System Design2. AccessoriesThe following diagram represents the main selection of d

Chapter 1 - IntroductionGP-2400/2500/2600 Series User Manual1-2Data TransferCableGPW-CB02GP Interfaces(1) Ethernet(2) Tool Connector(3) CF Card(4) So

Chapter 1 - IntroductionGP-2400/2500/2600 Series User Manual 1-3All optional equipment listed here is produced by Digital Electronics Corporation.*1

Chapter 1 - IntroductionGP-2400/2500/2600 Series User Manual1-4 Maintenance ItemsThey are available separately as optional maintenance items.

GP-2400/2500/2600 Series User Manual 1Thank you for purchasing the Pro-face GP2400/2500/2600 Series programmableoperator interface (hereafter referre

GP-2400/2500/2600 Series User Manual 2-12.1.1 Electrical2.1 General SpecificationsChapter2 Specifications 4. Part Names and Functions 5. Dimensio

Chapter 2 - SpecificationsGP-2400/2500/2600 Series User Manual2-23.2.1.2 EnvironmentalAmbient OperatingTemperatureStorage TemperatureAmbient Humidity

Chapter 2 - SpecificationsGP-2400/2500/2600 Series User Manual 2-3*1 The front face of the GP unit, installed in a solid panel, has been tested using

Chapter 2 - SpecificationsGP-2400/2500/2600 Series User Manual2-42.2 Functional Specifications2.2.1 Display*1 Changing the “Colors” setting to “256 c

Chapter 2 - SpecificationsGP-2400/2500/2600 Series User Manual 2-52.2.3 ClockThe GP’s internal clock has a slight error. At normal operating temperat

Chapter 2 - SpecificationsGP-2400/2500/2600 Series User Manual2-62.2.4 InterfacesEthernet InterfaceTool ConnectorCF Card InterfaceCF CardExpansionIn

Chapter 2 - SpecificationsGP-2400/2500/2600 Series User Manual 2-72.3 Interface Specifications2.3.1 Serial Interfaces (COM1)Recommended Connector: Ds

Chapter 2 - SpecificationsGP-2400/2500/2600 Series User Manual2-8 When creating your own cable, follow the instructions listed below:<With RS-422&

Chapter 2 - SpecificationsGP-2400/2500/2600 Series User Manual 2-9This interface is used for external reset, buzzer output, or sound output.2.3.2 Sou

Chapter 2 - SpecificationsGP-2400/2500/2600 Series User Manual2-10A:Display PanelThe GP monitor screen displays the screensetup and corresponding hos

PrefaceGP-2400/2500/2600 Series User Manual2Table of ContentsPreface...

Chapter 2 - SpecificationsGP-2400/2500/2600 Series User Manual 2-11J: CF Card SlotInsert the CF Card in this slot.K: Dip SwitchesJLMNO QPColor Indica

Chapter 2 - SpecificationsGP-2400/2500/2600 Series User Manual2-12Unit: mm [in.]2.5 Dimensions2.5.2 GP-2500 Series External DimensionsTopFront Side3

Chapter 2 - SpecificationsGP-2400/2500/2600 Series User Manual 2-132.5.3 GP-2600 Series External DimensionsUnit: mm [in.]TopFront Side301 [11.85]58

Chapter 2 - SpecificationsGP-2400/2500/2600 Series User Manual2-142.5.5 Installation FastenersUnit: mm [in.]16[0.63]31[1.22]19.5[0.77]10[0.39]11[0.43

GP-2400/2500/2600 Series User Manual 3-1Chapter3 Installation and Wiring1. Installation2. Wiring Cautions3. Tool Connector3.1 Installation3.1.1 In

Chapter 3 - Installation and WiringGP-2400/2500/2600 Series User Manual3-2 Creating a Panel CutCreate the correct sized opening required to inst

Chapter 3 - Installation and WiringGP-2400/2500/2600 Series User Manual 3-3• Be sure that the ambient operation temperature and the ambienthumidity

Chapter 3 - Installation and WiringGP-2400/2500/2600 Series User Manual3-42) Insert the installation fasten-ers into the GP’s insertionslots, at the

Chapter 3 - Installation and WiringGP-2400/2500/2600 Series User Manual 3-54) Use a Phillips screw driver totighten each fastener screw andsecure the

Chapter 3 - Installation and WiringGP-2400/2500/2600 Series User Manual3-6• Wherever possible, use thick wires (max 2mm2) for power terminals, and tw

PrefaceGP-2400/2500/2600 Series User Manual 3 CHAPTER 3 INSTALLATION AND WIRING3.1 Installation ...

Chapter 3 - Installation and WiringGP-2400/2500/2600 Series User Manual 3-71) Be sure that the GP’s power cord is not plugged in to the power supply.

Chapter 3 - Installation and WiringGP-2400/2500/2600 Series User Manual3-83.2.2 Connecting the Power SupplyGP unitTwisted LinesInput/ Out-put Powerp

Chapter 3 - Installation and WiringGP-2400/2500/2600 Series User Manual 3-93.2.3 Grounding(a) Exclusive Grounding (BEST) *1Connect the FG terminal f

Chapter 3 - Installation and WiringGP-2400/2500/2600 Series User Manual3-103.3 Tool ConnectorThe GP’s Data Transfer Cable can be attached to the GP u

Chapter 3 - Installation and WiringGP-2400/2500/2600 Series User Manual 3-113.5 CF Card Installation and Removal When using the GP Unit and a CF Car

Chapter 3 - Installation and WiringGP-2400/2500/2600 Series User Manual3-124) Confirm that the CF Card AccessLED turns ON. You cannot accessto the CF

Chapter 3 - Installation and WiringGP-2400/2500/2600 Series User Manual 3-133.5.1 CF Card HandlingThe CF Card has a data overwrite limit of approxima

Chapter 3 - Installation and WiringGP-2400/2500/2600 Series User Manual3-143.6 Sound Output3.6.1 Connecting Speaker LinesUse the following steps to c

Chapter 3 - Installation and WiringGP-2400/2500/2600 Series User Manual 3-155) Reattach the screw lock terminalblock to the GP.

GP-2400/2500/2600 Series User Manual3-16Memo

PrefaceGP-2400/2500/2600 Series User Manual4This manual includes procedures that must be followed to operate the GP cor-rectly and safely. Be sure to

GP-2400/2500/2600 Series User Manual 4-1Chapter4 Settings1. Types of SettingsThe settings required for the GP unit, when starting Runtime or when in

Chapter 4 - SettingsGP-2400/2500/2600 Series User Manual4-2 Offline• Network • Buzzer• Backlight • Self Test• OP. Switch System• Stylus • D

Chapter 4 - SettingsGP-2400/2500/2600 Series User Manual 4-3 NetworkThe following information explains how to enter the GP unit’s network settin

Chapter 4 - SettingsGP-2400/2500/2600 Series User Manual4-4 Backlight ControlHere, three selections (modes) are available.• WaitTo preserve the

Chapter 4 - SettingsGP-2400/2500/2600 Series User Manual 4-5 StylusThis setting is not required for GP series units. Date/TimeSets the GP u

Chapter 4 - SettingsGP-2400/2500/2600 Series User Manual4-6 MemoryDisplays the total amount of memory, and the amount of memory currently beingu

GP-2400/2500/2600 Series User Manual 5-1This section explains how to find and resolve GP unit problems.The GP unit can be connected to a wide range o

Chapter 5 - TroubleshootingGP-2400/2500/2600 Series User Manual5-25.1.1 No displayNo. Check Item/Operation Y/N Countermeasure1 Are all Pro-Designer s

Chapter 5 - TroubleshootingGP-2400/2500/2600 Series User Manual 5-35.2 SELF TESTThe GP unit is equipped with a number of self diagnosis features used

Chapter 5 - TroubleshootingGP-2400/2500/2600 Series User Manual5-45.2.2 SELF TEST - detailsThis section explains the contents of SELF TEST. Char

PrefaceGP-2400/2500/2600 Series User Manual 5• Do not create switches used to control machine safetyoperations, such as an emergency stop switch, as

GP-2400/2500/2600 Series User Manual 6-1Chapter6 Maintenance1. Regular Cleaning2. Periodic Check Points3. Replacing the BacklightWhen the surface

Chapter 6 - MaintenanceGP-2400/2500/2600 Series User Manual6-23. Attach the new gasket to the GP.Be sure to insert the gasket into theGP’s groove so

Chapter 6- MaintenanceGP-2400/2500/2600 Series User Manual 6-36.2 Periodic Check PointsTo keep your GP unit in its best condition, please inspect the

Chapter 6 - MaintenanceGP-2400/2500/2600 Series User Manual6-4Use the following table to check that you have ordered the correct backlight.6.3 Replac

PrefaceGP-2400/2500/2600 Series User Manual6Installation/Maintenance• Be sure to securely connect all cable connectors to the GP.A loose connection m

PrefaceGP-2400/2500/2600 Series User Manual 7• Use only the designated torque to tighten the GP’s termi-nal block screws. If these screws are not ti

PrefaceGP-2400/2500/2600 Series User Manual8General Safety Precautions• Do not strike the touch panel with a hard or pointed object, or presson the t