Pro-face AGP-3300 Series Guia de Instalação descarregar pdf (Página 15)

15

 Removing the USB Holder

(1) Lift up the tab of the USB holder and

then remove the USB cover as shown

below.

(2) After removing the USB cable,

remove the picks pushing the USB

holder from both top and bottom.

UL/c-UL/CSA Approval

The GP-3300/3400 Series units are UL/c-

UL/CSA listed products.

(UL File No.E220851, UL File

No.E182139, CSA File No.219866)

<Cautions>

Be aware of the following items when

building the GP into an end-use product:

•

The GP unit’s rear face is not approved as

an enclosure. When building the GP unit

into an end-use product, be sure to use an

enclosure that satisfies standards as the

end-use product’s overall enclosure.

• The GP unit must be used indoors only.

• Install and operate the GP with its front

panel facing outwards.

• If the GP is mounted so as to cool itself

naturally, be sure to install it in a verti-

cal panel. Also, it’s recommended that

the GP should be mounted at least

100mm away from any other adjacent

structures or machine parts. The tem-

perature must be checked on the final

product in which the GP is installed.

• Serial Interface (COM2) is not Limited

Power Source.

• For use on a flat surface of a Type 4X

(Indoor Use Only) and/or Type 13

Enclosure.

UL1604/ANSI/ISA-12.12.01-2007/

CSA-C22.2, No.213 -

Compliance and Handling Cautions

(1) Power and input/output wiring must

be in accordance with Class I, Divi-

sion 2 wiring methods - Article 501-

10(B) of the National Electrical Code,

NFPA 70 within the United States,

and in accordance with Section 18-

152 of the Canadian Electrical Code

for units installed within Canada.

(2) Suitable for use in Class I, Division 2,

Groups A, B, C, and D Hazardous

Locations, or Non-Hazardous

Locations only.

(3) “WARNING: Explosion hazard-

substitution of components may

impair suitability for Class I, Division

2”, and

“AVERTISSEMENT: RISQUE

D’EXPLOSION-LA SUBSTITUTION

DE COMPOSANTS PEUT RENDRE

CE MATERIAL INACCEPTABLE

POUR LES EMPLACEMENTS DE

CLASSE I, DIVISION2”.

(4) WARNING: Explosion hazard-when

in hazardous locations, turn OFF

power before replacing or wiring

modules.

Product Model No.

UL/c-UL/CSA

Registration Model No.

AGP3300-L1-D24 3280007-03

AGP3300-S1-D24 3280007-02

AGP3300-T1-D24 3280007-01

AGP3301-L1-D24 3280007-13

AGP3301-S1-D24 3280007-12

AGP3302-B1-D24 3280007-24

AGP3310-T1-D24 3710011-01

AGP3360-T1-D24 3710011-02

AGP3400-T1-D24 3280035-01

AGP3400-S1-D24 3280035-02

AGP3450-T1-D24 3280035-31

USB Holder

Tab USB Cover

1 2 ... 10 11 12 13 14 15 16

Comentários a estes Manuais

Sem comentários